The Secrets of Successful In-Floor Heating Installation

The Secrets of Successful In-Floor Heating Installation
June 02 13:10 2018 Print This Article

The rapid technological advancement has brought us a variety of efficient heating systems to grip the entire world. These are pipes embedded the floor for better comfort and for uniform heat radiation. The methods of application are many – one may choose a system that works on gas, water, steam or electricity, each with a very different profile. When in doubt, ask the Engineering consulting firms about the pros and cons, including the risks.

Carefully Inspect the Sub-floor

The sub-floor is an important part that can minimize or maximize the heating. Make it tidy by cleaning up any dust and other particles. Clean it well before you fix the segments to be heated. The sub-floor may require more serious preparation, like priming. The adhesive needs a good surface to adhere to. You may do a test to see how it would behave.

The Proper Installation Work

Be well prepared for the installation works – and not just financially. It is very likely that your home will be upside down, especially if you choose to upgrade all the rooms. The flooring will be taken out in order to install the pipes. Expect a work of amplitude. Even though you would want to shorten this part, don’t skip the proper insulation stage. This will ensure that heat is well distributed and that your energy bills will go lower. Be careful when the heating mats are positioned underneath the floor. A break in the wiring may disrupt the electricity flow, if you are installing the electric type. Also, don’t let the wires be bent too much or crushed. This may lead to serious consequences, such as fire.

Adequate Flooring Materials

Homes nowadays use a variety of flooring materials: concrete, tiles, wood, and more. Some heat up quicker than others. Tiles and concrete tend to get very cold in winter, and ask for a powerful in-floor heating system. Try to avoid the cold hard flooring. Opt for a redesign since you are about to go through the rebuilding, and this time choose a quick-heating floor material. It is of no use to have the best heating system if you sabotage it. What you do in fact is to make energy consumption soar.

Get the Best Board Insulation

It is important to talk here with licensed professionals and ask about the boards and their joints. These insulating boards have to be perfectly knit together, otherwise the coldness from the soil will make its way in your home, and the heat will find its way down, into the ground. Make sure there is continuity when the boards are joined. If a board cracks, then the system is no longer sealed and you will be losing heat. You should do a quality check after the workers finish installing these.

Finally, in order to enjoy maximum heating performance, do not let thick carpets stay in the way. These often act as insulator and keep the heat locked below, under the flooring. This defies the purpose of the in-floor heating, which has to radiate warmth all over the room, and also adds to the costs of energy consumption.

view more articles

About Article Author

write a comment


No Comments Yet!

You can be the one to start a conversation.

Add a Comment

Your data will be safe! Your e-mail address will not be published. Also other data will not be shared with third person.
All fields are required.